Tile Installation — Rockland County, NY
Rockland Design Factory installs tile across all 24 Rockland County, NY communities — kitchen backsplashes, fully waterproofed showers, floors, and heated tile in porcelain, natural stone, mosaic, and large-format. We do the substrate prep and waterproofing that make tile last decades.
Tile Applications & Pricing
- Floor tile labor: $12–$18/sq ft standard, $18–$30/sq ft for large-format, patterns (herringbone, basketweave), and mosaics.
- Custom tiled shower: $3,500–$8,000 including waterproofing, niche, bench, and curb.
- Kitchen backsplash: typically a 1–2 day install.
- Heated tile floors: electric radiant (Schluter DITRA-HEAT, Nuheat) under tile, controlled by a programmable thermostat.
Why Substrate Prep & Waterproofing Decide Everything
The most common tile failures are not about the tile — they are about what is underneath it. Every wet area we tile gets a complete waterproofing system before a single tile goes on: a Schluter KERDI or liquid-applied membrane on the walls and a sloped, waterproofed pan on the floor. In Rockland County the waterproofing inspection is a mandatory stop before tile is set on permitted bathroom work, and we never shortcut it.
Standalone or Part of a Remodel
We install tile as a standalone service — a new kitchen backsplash, a re-tiled shower, a new floor — or as part of a full bathroom renovation. You can select tile, layout, and grout at our Congers showroom, and we provide a fixed-price written quote after measuring the space.
Frequently Asked Questions
How much does tile installation cost in Rockland County?
Tile installation in Rockland County typically runs $12–$30 per square foot for labor, plus the cost of the tile. Standard floor tile installs at $12–$18/sq ft labor; large-format tile, patterns, and mosaics run $18–$30/sq ft. A full custom tiled shower including waterproofing, niche, bench, and curb typically runs $3,500–$8,000 in labor and materials.
Do you waterproof showers before tiling?
Always. Every wet area gets a complete waterproofing system before any tile goes on — a Schluter KERDI or liquid-applied membrane on the walls and a sloped, waterproofed pan on the floor. In Rockland County the waterproofing inspection is a mandatory stop before tile is set on permitted bathroom work. Skipping waterproofing is the most common cause of failed tile showers.
Request a Consultation
Call (845) 682-3076 or submit a request online. Our showroom is at 437 N Route 9W, Congers, NY 10920.
A practical guide to tile planning
This page is a starting point for homeowners researching tile installation rockland county ny. A productive planning pass is to coordinate tile size, layout, grout, transitions, waterproofing details, and the surfaces that need preparation. The most useful remodeling decisions connect the desired result with the room’s existing conditions, the way the household uses the space, and the materials that will be ordered. Before comparing products or layouts, note the room dimensions, plumbing and electrical locations, appliance or fixture sizes, natural light, storage needs, and any features that should remain.
Good tile planning begins with a clear scope rather than a single product choice. A consultation can help organize the work into design questions, material selections, preparation, installation, and the decisions that may affect timing or budget. Use the resources on this page to narrow the direction, then bring photos, measurements, inspiration images, and a list of priorities to the next conversation.
Questions to consider before you begin
- Which tile format and pattern support the room’s scale and sightlines?
- How will grout color, movement joints, trim, and transitions be handled?
- Which walls or floors need repair or preparation before tile is installed?
Materials and finishes can look different in a photograph than they do in a room, so samples and full-size displays are useful when available. Ask how seams, transitions, trim, ventilation, lighting, storage, cleanup, and protection of adjacent areas will be handled. Rockland Design Factory’s Congers showroom can be a place to compare kitchen and bath materials while you decide which options fit the project.
Request a consultation when you are ready to review the room, the priorities, and the next practical step.
Ready to Get Started? Request a Consultation
Call or text us to schedule your in-home consultation. We serve all of Rockland County, NY and Bergen County, NJ.
Phone: (845) 682-3076
Text: (914) 409-6345
Email: RocklandDesignFactory@gmail.com
Showroom: 437 N Route 9W, Congers, NY 10920
Visit Our Full Website