Stony Point, NY 10980 · Town of Stony Point
Kitchen cabinets, kitchen & bath remodeling in Stony Point, NY
Rockland Design Factory is a family-owned kitchen cabinet showroom and kitchen and bathroom remodeling company serving Stony Point, NY 10980. Homeowners and trades from Stony Point can buy cabinets only, starting from $6,000 without installation, or commission a full remodel. The 1,800 sq ft showroom is at 437 US-9W in Congers, open Monday to Saturday, and walk-ins are welcome.
In Stony Point
What can we do for your Stony Point home?
Three services, one showroom. Pick the one that fits your project.
Custom kitchen cabinets
Which cabinets suit a Stony Point kitchen?
It depends on the room and the budget. Most family kitchens land in semi-custom; the showroom lets you compare tiers side by side.
| Stock | Semi-custom | Custom | |
|---|---|---|---|
| Sizing | Fixed sizes, filled with fillers | Standard sizes with modifications | Built to the room |
| Door styles and finishes | Limited selection | Wide selection | Widest selection, specialty finishes |
| Lead time | Shortest | Moderate | Longest |
| Relative cost | Lowest | Middle | Highest |
| Good fit for | Rentals, budget refreshes | Most family kitchens | Unusual rooms, high-end kitchens |
General industry categories. Which tier a given line falls into, and its current lead time, is confirmed for your order in the showroom.
Kitchen remodeling process
How does a remodel in Stony Point work?
Measure, scope, design with 3D renderings, order, then about 20 days of typical construction. Permits go through the local building department where required.
- 01
Visit or call
Walk into the Congers showroom during open hours or call (845) 682-3076. Bring photos and rough measurements if you have them.
- 02
Measure and scope
We measure the room and agree on what is in and out of the job. Every estimate is based on a written scope.
- 03
Design with 3D renderings
Your layout is drawn up and 3D design renderings are available so you can review the plan before ordering.
- 04
Select cabinetry and finishes
Compare door styles, finishes and boxes from the showroom lines. Tile and flooring can be sourced from suppliers such as Floor & Decor.
- 05
Order and permits
Materials are ordered and permits are pursued where required. Lead times vary by line and by municipality and are separate from construction time.
- 06
Construction
Typical kitchen or bathroom construction takes about 20 days each, after separate planning, ordering and permit time. This is a typical figure, not a guarantee.
- 07
Walkthrough and warranty
We walk the finished room with you. 2-year workmanship and 10-year cabinetry warranty terms are confirmed in writing.
Not sure which path fits? Walk in and open a few drawers first.
Plan a visit
3D design renderings are available
During the design phase we can prepare 3D renderings of your kitchen or bathroom so you can review cabinet layout and finishes before ordering. Renderings are prepared for your project; there is no online walkthrough tool on this site.
Bathroom remodeling & design services
What does a remodel cost in Stony Point?
Rockland County ranges from our own FAQ. Your number comes from a written scope.
| Project | Typical range | What it covers |
|---|---|---|
| Cabinets only | From $6,000 | Cabinetry purchase. No installation included. |
| Full kitchen remodel | $65,000 – $110,000 | Design, cabinetry, demolition and full construction. |
| High-end kitchen remodel | $120,000 – $220,000 | Larger footprints, premium cabinetry and finishes. |
| Full bathroom remodel | $21,000 – $35,000 | Full gut-and-rebuild of a standard bathroom. |
| Primary / wet-room bathroom | $28,000 – $55,000 | Primary suites and open wet-room layouts. |
Ranges from our published FAQ. Every estimate requires a written scope. Typical construction is about 20 days per kitchen or bathroom; ordering and permit lead times are separate and vary.
Rockland County, NY
Certificate CRH-24014
- Issued to
- Rockland County NY Handy Man Services LLC
- Doing business as
- Rockland Design Factory
- Named on certificate
- Simon Sese
- Effective
- January 9, 2026
- Expires
- January 9, 2027
- Restriction
- NO SUBCONTRACTORS
The existing site notes that the official county directory lists the entry as CP-H-24014. The number shown here is the one printed on the certificate itself; the two references have not been reconciled by us.
Nearby
Also serving towns near Stony Point
FAQ
Questions from Stony Point homeowners
Does Rockland Design Factory serve Stony Point, NY?
Yes. Stony Point (10980) is within our Rockland County service area for kitchen cabinets, kitchen remodeling and bathroom remodeling. Projects are planned from the showroom at 437 US-9W in Congers.
Do I need a permit for a remodel in Stony Point?
It depends on the scope. Permits for Stony Point are handled through the local building department (Town of Stony Point); we discuss what your project needs during scoping, and permit lead times are separate from construction time.
Can I buy kitchen cabinets without a full remodel?
Yes. Homeowners and trades can buy cabinets only. Cabinets-only orders start from $6,000 and do not include installation.
How long does a remodel take?
Typical construction is about 20 days for a kitchen and about 20 days for a bathroom. Ordering and permit lead times are separate and vary, so this is a typical figure, not a guarantee.
Is Rockland Design Factory licensed?
Rockland County certificate CRH-24014 is issued to Rockland County NY Handy Man Services LLC, doing business as Rockland Design Factory, effective January 9, 2026 through January 9, 2027, with the restriction "No subcontractors".
Showroom
437 US-9W, Congers
Congers, NY 10920 · 1,800 sq ft · Walk-ins welcome
- Monday – Friday
- 8:30 AM – 5:00 PM
- Saturday
- 10:00 AM – 3:00 PM
- Sunday
- Closed
Planning a renovation in Rockland County?
Spring and summer: Start design and cabinet selection before choosing a construction date. Ask the building department for your property’s jurisdiction which permits are needed and its current review times. Permit approval and supplier delivery dates vary; an early consultation is not a delivery guarantee.
Fall and winter: Discuss delivery access, snow and ice clearance, indoor material storage, dust containment, and a temporary cooking or bathing plan. Confirm product-specific temperature and humidity requirements with your installer before materials arrive.
General seasonal guidance—not a live weather forecast or a permit determination. Confirm requirements for your address and project scope.
Next step
Bring your measurements. We will bring the door samples.
Pick a time online for a free 60-minute 3D design consultation, Monday to Saturday. Sundays by arrangement by phone or email.